RTL Design & Verification Engineer specializing in Verilog RTL design, SystemVerilog, UVM, SVA and coverage-driven verification, trained across the full ASIC flow at Maven Silicon.
- Designed an AMBA APB-to-SPI master core in Verilog and delivered lint-clean RTL with SpyGlass.
- Built a UVM testbench with a multi-FIFO scoreboard for a 2-master, 3-slave AXI interconnect, covering parallel traffic and round-robin arbitration with 23 SVA properties.
- Verified the APB-to-SPI core with a two-agent UVM environment (APB + SPI) across all four SPI modes, and verified a dual-port RAM with a SystemVerilog layered testbench.
- Closed functional coverage with covergroups: 96.52% on the AXI interconnect, 95.45% on the APB-to-SPI UVM environment and 100% on the dual-port RAM, using Synopsys VCS, Verdi, URG and QuestaSim.
| Project | Type | Highlights | Tools |
|---|---|---|---|
| AXI Interconnect Verification (2 Master – 3 Slave) | UVM Verification | 2 master + 3 slave agents, reset agent, multi-FIFO scoreboard with per-ID matching and address-decode checks, parallel and same-slave (arbitration) tests, 23 SVA properties; 24/24 regression runs pass, 96.52% functional coverage, 95.57% assertion coverage | SystemVerilog, UVM, SVA, QuestaSim, Make |
| APB Interface with Master SPI Core | UVM Verification | Active APB and SPI agents, virtual sequencer, scoreboard checking PWDATA↔MOSI and PRDATA↔MISO, sequences for all four SPI modes (CPOL/CPHA) in LSB- and MSB-first order, APB protocol assertions; 95.45% functional coverage, 90.21% line coverage | SystemVerilog, UVM, VCS, Verdi, URG |
| Dual-Port RAM Verification | SystemVerilog Verification | Layered class-based testbench (generator, separate read/write drivers and monitors), reference model with read-before-write collision modelling, self-checking scoreboard, 3 tests including a same-address collision test; 100% functional coverage (15/15 bins), 0 mismatches | SystemVerilog, QuestaSim, Make |
| APB Interface with Master SPI Core | RTL Design | FSM-based controller, APB slave interface, programmable baud-rate generator (CPOL/CPHA), full-duplex shift-register datapath, transfer-complete interrupt; lint-clean RTL (0 errors, 0 latches); synthesized with timing met at 50 MHz | Verilog, VC SpyGlass, Design Compiler, VCS, Verdi |
| Area | Skills |
|---|---|
| Languages | SystemVerilog, Verilog |
| Verification Methodology | UVM (Universal Verification Methodology), Register Abstraction Layer (RAL), Constrained-Random Verification (CRV), SystemVerilog Assertions (SVA), Functional Coverage, Code Coverage |
| Design & Timing | RTL Linting, Synthesis, Static Timing Analysis (STA) |
| Protocols | AMBA AXI (Multi-Master/Multi-Slave Interconnect), AMBA APB, SPI (Serial Peripheral Interface) |
| EDA Tools | Synopsys VCS, Verdi, Synopsys SpyGlass, QuestaSim, Xilinx Vivado |
| VLSI Design Fundamentals | Digital Electronics & Logic Design, CMOS & Semiconductor Basics |
| Scripting & Platforms | Linux (command line), GitHub |
Advanced VLSI Design & Verification — Maven Silicon Softech Pvt. Ltd., Bangalore
- Full ASIC flow, from RTL coding to UVM verification closure, including multi-agent SoC-level testbenches.
- Synthesizable Verilog RTL for AMBA APB, AXI and SPI, checked with RTL lint; SystemVerilog/UVM testbenches with CRV, coverage and SVA.
- Static Timing Analysis: setup/hold checks, timing report analysis and timing closure in the ASIC/SoC sign-off flow.
Bachelor of Engineering, Electronics & Communication Engineering — AJ Institute of Engineering and Technology, Mangalore · CGPA 7.9/10 · 2025
Open to RTL Design and Design Verification roles.