Shift, Tone, Decode. Software in testing. Version 0.1.13. Around the shack it also answers to Sending Transmittal Disease.
The real expansion is Shift, Tone, Decode. The other one is the joke. STD is a 64-bit Windows application, a Qt 6.11.1 MSVC digimode console for a TCI radio, currently in the contagious stage: it keys on the bench, it has not finished making the rounds, and the recommended treatment is another shot of bourbon while the modes get proved on the air. Lyra is the transceiver. SDRLogger+ is the logbook. CW stays in Lyra.
STD: Help keep the infections spreading and buy us a shot of bourbon.
Copyright (C) 2026 Rick Langford (N8SDR).
GNU General Public License, version 3. The license text is COPYING.
Original files in this repository are GPL-3.0-or-later (SPDX-License-Identifier: GPL-3.0-or-later). Modem math rewritten from Fldigi (Dave Freese W1HKJ and the Fldigi authors, GPL-3) and the FT8, FT4, and FT2 path from MSHV are GPL-3. Speech to text uses whisper.cpp (the ggml authors, MIT), built in; its notice is in resources/licenses/whisper.cpp-LICENSE. CW stays in Lyra.
TX sends one of these when the operator presses TX or Tune. Opening the radio does not key. The text command START is never sent. On Hell, RTTY, PSK, QPSK, Olivia, Contestia, MFSK, DominoEX, Thor, and MT63, a finished pass takes the sent text off the front of the transmit box, as Fldigi does, so the next TX sends only new text. A stopped pass takes the characters that already went out. Text changed during the pass is left alone. JS8 keeps its own queue. RTTY, PSK, and QPSK send live, as Fldigi does: TX keys and sends what is in the box, text typed while on the air goes out as it is typed, and an empty box sends idle (LTRS in RTTY, phase reversals in PSK) without dropping TRX. Press TX once to end after the box is sent, and again to stop at once; characters not yet on the air go back into the box. A ▶ macro (one with <TX>) keys when Macros key is on and, with <RX>, returns to RX when its text is done. A macro pressed while on the air is added to the box. Back to RX after (on, 25 s by default; 5, 10, 15, or 25 s) ends a live transmission by itself when nothing new was typed for that long; turn it off to stay keyed until you press TX. Options → Speech… reads received text aloud with a Windows voice on a sound device you pick, not through the radio. It reads RTTY, PSK, QPSK, Olivia, Contestia, MFSK, DominoEX, Thor, and MT63 a line at a time, or a run of finished words on a long line, and waits quietly for new text. Callsigns and reports are spelled out, noise runs can be skipped, and it stops while you transmit. Hell is a picture and is not read; nor are JS8 or the FT8 family. With read-back on, a Speech chip beside CLR RX mutes and unmutes, and the number beside it is the volume. It is off until you turn it on. Talk does the reverse: it turns your voice into transmit text. In Options → Speech… → Transmit pick a microphone, set the gate, and download a Whisper model (75 to 490 MB, fetched only when you choose one, so STD itself stays small). It runs on the CPU. Hold Talk and speak. The words land at the end of the transmit box with callsigns and reports written the ham way (Kilo Eight Alpha Bravo becomes K8AB, five nine nine becomes 599), and nothing keys until you press TX. My words in the same tab lists what Talk should expect (club calls, names, towns, your rig and antenna); your name and QTH from Options → User and the station in the QSO bar are added by themselves. Corrections fixes words it keeps getting wrong, one per line as heard = send. To teach one on the spot, select the wrong text in the transmit box, right-click, and pick Talk: always send … as, or add it to My words. The waterfall picture updates once per turn, so a quiet band does not keep the CPU and the GPU busy.
| Mode | What this build sends |
|---|---|
| FT8 | 15 s. DIGU. MSHV generator. |
| FT4 | 7.5 s. DIGU. |
| FT2 | 3.75 s. DIGU. |
| JT65A, JT65B, JT65C | 60 s. DIGU. Tone 0 stays near 1270 Hz. |
| Q65A, Q65B, Q65C, Q65D | 30 s. DIGU. The tone follows the cursor. |
| MSK144 | Meteor scatter, MSHV generator and decoder. 72 ms frames at 2000 baud, tones fixed at 1000 and 2000 Hz, on 500 to 2500 Hz around 1500 Hz, repeated from 250 ms into the slot until 370 ms before it ends. Pings print as they land, anywhere in the period. The MSK row above the waterfall holds MSHV's TX/RX period (5, 7.5, 10, 15, or 30 s, 30 s by default for both), DF Tol (10 to 400 Hz, 150 by default), Sh (MSK40 short messages), and SWL. Under it is MSHV's ping display: time across the period, frequency up, the period on the air on top and the one before under it, with a mark where each decode came from. The receive list uses MSHV's columns: Time, T, dB, DF, Message, Navg, Bit err, Eye, Freq. DIGU. Dials on 6 m and the 2 m chip: 50.260 and 144.150 MHz, Region 1 50.280 and 144.360 MHz. FT8-style messages and contest exchanges; with MSK40 short messages on, <K1JT N8SDR> R+06 frames too (reports -03 to +16, RRR, 73). |
| MSKMS | MSHV's MSK144 variant: 72-bit messages and the duration-strength report (26 to 59, R26) taken from the ping you heard. Same tones and timing as MSK144, 30 s by default. PSK Reporter lists it as MSK144. |
| Feld Hell | 17.5 columns/s, 14 pixels per column. A 2 ms raised-cosine edge, then the envelope is limited to the 245 Hz channel. The marker is centered on the carrier. Reverse video flips the tape. Drag the bar under the tape to make it taller; full rows scroll into a history you can read back with the wheel. |
| Slow Hell | 2.1875 columns/s, same cosine. |
| Feld Hell X5 | 87.5 columns/s, hard keyed. |
| Feld Hell X9 | 157.5 columns/s, hard keyed. |
| FSK Hell | 17.5 columns/s, 122.5 Hz shift, reverse off. A tone stays up. |
| FSK Hell-105 | 17.5 columns/s, 55 Hz shift, reverse off. |
| Hell 80 | 35 columns/s, 300 Hz shift, reverse off. |
| RTTY | One menu row. 45.45 baud, 170 Hz, 5 bits, 1.5 stop, mark high, reverse off. A space sends LTRS, then the space. |
| PSK31 through PSK1000 | BPSK at 31.25, 62.5, 125, 250, 500, and 1000 baud. A zero reverses the phase. |
| Olivia | 4/250, 8/250, 8/500, 16/500, 16/1000, 32/1000. |
| Contestia | The same six rows. |
| QPSK31 through QPSK500 | K=5 convolutional code at 31.25, 62.5, 125, 250, and 500 baud. |
| MFSK | MFSK4, 8, 11, 16, 22, 31, 32, 64, 64L, 128, 128L. NASA K=7. The L rows use the long interleaver. |
| DominoEX | Micro, 4, 5, 8, 11, 16, 22. 18-tone incremental keying. FEC is off. Micro is 2 baud. |
| Thor | 4, 5, 8, 11, 16, 22 are NASA K=7. 25x4, 50x1, 50x2, and 100 are IEEE K=15. Thor Micro stays off the menu. |
| MT63 | 500S, 500L, 1000S, 1000L, 2000S, 2000L. 64 carriers, Walsh code, short or long interleave. |
| JS8 | JS8Call-improved Normal. 15 s, 50 Hz. Band activity, conversation, and call activity, with HB, CQ, Reply, SNR?, INFO?, STATUS?, GRID?, Directed, and Deselect. TX waits for the next 15 s UTC period and sends one frame, starting half a second in. A longer message continues on the following periods. |
| RADE V1 | FreeDV RADE digital voice, about 1500 Hz wide, from the FreeDV rade_c library. DIGL on 160, 80, and 40 m, DIGU on 60 m and 30 m and up, the FreeDV convention. 60 m (the 5.3 chip) has the FreeDV Reporter dials 5.3685 and 5.4035, and FT8 has 5.357; other modes hide it. Speech from the Speech microphone. The end-of-over carries your callsign from Options → User the way the FreeDV app sends it, so FreeDV stations and FreeDV Reporter can show who you are, and Heard shows the call from the other station's end-of-over. Offset shows the received station's frequency offset in Hz, as FreeDV shows it. The microphone is levelled before the encoder, as FreeDV does. TX waits about a quarter second to fill its buffer, so the modem frames go out without gaps, and holds 200 ms of silence after the end-of-over. Drive 100 is the FreeDV app's level. Gain, 0 to 30 dB, sits after the microphone and before the speech-level bar. The top bar shows the radio dial in every mode, green while receiving and red while transmitting, with DIGU or DIGL in the box. RX (green while receiving) and TX work like the radio's switch; click RX to end your over with your callsign. Halt is hidden in RADE. Scan steps the FreeDV Reporter calling dials (Dwell 5–30 s each) and listens for a RADE station; Stay on sync stops it on the first one heard, or it keeps looping. Right-click Scan to scan all bands or only the ones you check. Dials you add with Extra are scanned too; right-click Extra to edit or delete them. Mic NR (RNNoise noise suppression) and BW expand (decoded speech widened to 48 kHz) are on by default, as in the FreeDV app. FreeDV Reporter is in Options → Network Configuration. |
| RADE V2 | Experimental, about 860 Hz, will not talk to V1. BPF (on by default) is the modem band-pass; it is greyed out on V1, which sends without one, as FreeDV does. |
| WSPR | WSPR-2 from WSJT-X and JTDX. Even UTC minutes. Tx power, Tx Pct, and band hopping. The locator is Options → User. Rows stay in the receive colour, under titles, with a rule between periods. Heard stations post to WSPRnet only when WSPRnet is On, and only while WSPR is the mode. |
Needed stations. Options → Decode List Options → Mark Needed Stations, off until ticked, adds a Need column to the FT8, FT4, FT2, JT65, and Q65 list, checked against your ADIF log. NEW (deep red) is a DXCC entity never worked; BAND (amber) an entity worked but not on the band you are on; GRID (blue) a grid never worked; GRID+BAND (light blue) a grid worked, but not on this band; B4 (dim) a call already worked on this band. Worked QSOs count; confirmations do not. The station is the one sending: the call after CQ, or the second call in a reply. Entities come from AD1C's cty.dat (country-files.com), built in; a newer cty.dat placed in %APPDATA%\N8SDR\STD is used instead. What counts as worked is set in Options → Log Options → Log file and logger → Worked list: STD's ADIF file only (the default); STD's ADIF file plus another ADIF file, read but never written (WSJT-X's wsjtx_log.adi, or an export from Log4OM, DXKeeper, N1MM, and others), read again whenever it changes; or STD's ADIF file plus SDRLogger+ (live), which asks SDRLogger+ on this PC (127.0.0.1, port 5050 unless changed) for its whole log every five minutes and ten seconds after each QSO, and keeps the last copy so the marks still work while SDRLogger+ is closed. The same list drives Hide QSO B4.
Clock check. The clock check watches the DT of the FT8, FT4, and FT2 decodes. When the middle of the last few minutes of them is off by more than 1 s in FT8, 0.5 s in FT4, or 0.3 s in FT2, the status bar shows Clock 1.3 s fast (or slow) and the status line says so once. It needs eight decodes from two periods, and a few stations far off do not move it. STD does not change the clock: sync it with Windows time, Meinberg NTP, or BktTimeSync. FT8 is lost when the PC clock is off by much more than a second, so this catches a quiet failure.
WEFAX-576 receives. IOC 576, 120 lines per minute. Stations are listed by ITU region, with NOAA hours on the frequencies that have them. A click sets the dial 1.9 kHz under the assigned frequency, USB, marker 1900 Hz. Start, a left-edge click, Auto save, Open folder, and Fit are on that screen. It does not key, and it does not send START.
These are not on the Mode menu. They do not key.
- 8PSK. A different constellation from QPSK. Not on the menu.
- FLD-88 is queued. JS8 Fast, Turbo, Slow, and Ultra are not on the menu.
- MSHV modes still outside STD are listed in
docs/mshv-modes.md. - Options → Contest Mode (RTTY, PSK, Hell) puts a contest row on the QSO bar: ARRL RTTY Roundup, CQ WW RTTY, NA Sprint, Field Day, a Feld Hell sprint, a serial-number contest, or Custom. F1 to F8 send the Run or S&P messages, Enter sends the next one, their exchange is read from their text, DUPE checks your log, and each QSO logs CONTEST_ID, STX/SRX, and the exchanges. Off until you turn it on. Details in contest.
- In every menu, an option you can switch on or off has a small circle that fills green when on.
- Options → TX Confirmation If 73 Or RR73 is on by default, as in MSHV: in MA Std and MA DX their RR73 is answered with 73 before the QSO ends and is logged. Off, FT8, FT4, FT2, and Q65 end the QSO on their RR73 with no 73. JT65 always sends the 73.
CW stays in Lyra. STD does not send CW.
STD reads Fldigi .mdf macro files as they are, and a macro's own tags decide what a click does: <TX> keys and sends (the button shows ▶), <RX> goes back to RX after the text, <CLRTX> empties the transmit box first, and a macro without <TX> adds its text to the end of the box, so macros can be chained. The Macros key chip beside the bank button is the lock: red ON lets ▶ macros key, OFF keys nothing. <LOG>, <CLRQSO>, <CLRRX>, <INCR>, and <DECR> run once a keyed macro's text has gone out, and <TIMER:NN> listens NN seconds and sends it again until you type, click, or hear your call.
<MYCALL>, <MYLOC>, <MYNAME>, <MYQTH>, <ANTENNA>, <TX_PWR> and the other station tags come from Options → User. On a keyboard mode the QSO bar fills <CALL>, <NAME>, <QTH>, <ST>, <PR>, <LOC>, <RST>, and <QSOTIME>. A ▶ macro that needs an empty QSO bar field does not key; <NAME|OM> sends OM instead. The QSO bar offers the name, QTH, report, and locator it reads in their text (a click or Tab takes one), and a call already in STD's log (or a second ADIF log, which STD keeps a copy of in its log folder) fills the empty fields from the last QSO; <WELCOME> and <LASTQSO> use that. Options → Lookup can also fill name, QTH, state, and locator from HamQTH or QRZ.com, only the name for a portable call, and anything you type wins. Hover a button to see what it will send. <WX> sends your local weather from Options → Weather: Open-Meteo from your locator (free, no account), an NWS station, or your Ambient Weather or Ecowitt station. Fldigi tags STD does not run, such as <IDLE> and <MODEM:…>, are left out and named, never sent as text. Details are in macros.
Options → Log Options → Log file and logger → Link to a logger over WSJT-X UDP sends decodes and Status (dial, mode, and the call being worked) the way WSJT-X does, so SDRLogger+, GridTracker, JTAlert, and Log4OM see STD, and the call in STD fills the logger's log entry. With Accept requests from the logger on, a click on a decode in the logger works that station in STD just as a double-click in STD would, and the logger can halt TX or set the free text. For SDRLogger+: turn on its Decoder Link (UDP) on port 2237; in STD tick Link to a logger over WSJT-X UDP, Accept requests from the logger, and WSJT-X UDP logged QSO (leave logged ADIF off; SDRLogger+ logs only from logged QSO), port 2237; and tick Log Automatically QSO (or Prompt Me To Log QSO) under Options → Log Options. The link alone does not log. Step by step in connect.
View → DXpeditions opens a panel of the announced DX operations from NG3K's ADXO list (call, entity, start and end, bands, modes, QSL, and the notes). It floats the first time and docks like the other panes. Digital modes is the filter it opens with: FT8, FT4, FT2, RTTY, PSK, and the ones that say "+ digital" or "all modes"; All modes, FT8 / FT4 / FT2, RTTY, and PSK are the other choices. On the air now keeps the operations whose dates include today (UTC), and those rows are tinted green. Click a title to sort by status, call, entity, dates, bands, or modes. A double-click moves STD to that DXpedition's band and digital mode. DXpeditions run the FT modes, RTTY, and PSK, so the first one listed of FT8, FT4, RTTY, and PSK is used (then FT2, JT65, Q65, MSK144; "+ digital" alone is FT8). FT8 turns Super Hound on when the listing says Fox/Hound (f/h, SuperFox) and off when it does not. PSK is PSK31 unless the listing names another rate. The band is the one you are on when it is listed, otherwise the nearest listed band with a dial for that mode. RTTY and PSK have no band dial in STD, so only the mode changes. Only the dial and mode move, over TCI, and the status line says what was done. A right-click puts the call in the QSO bar (copied on the FT8 family), adds it to the hot list, or opens the info page. The list is fetched only while the panel is open, then once an hour, and Refresh fetches now; the last list is kept on disk, so the panel works offline. Mark spotted DXpeditions (off until ticked) adds cluster spots from Spothole, which gathers the DX clusters and the RBN: only digital spots (FT8, FT4, RTTY, PSK, and the other data modes) of the digital DXpeditions on the air. A spotted row reads SPOTTED with its band, mode, and age, sorts first, and a double-click goes to the spot. Check every is 90 or 180 seconds and Keep spots 10, 20, or 30 minutes. No callsign is sent. Nothing in it keys, and START is never sent.
The hot list is the calls you are watching for, as in SDRLogger+. Tick a call in the DXpeditions table, or type calls in View → Hot list…. It shows on the top bar, right of the dial; View → Hot list on top bar turns that off and on, and Top bar shows picks All calls, Ticked calls (tick them in View → Hot list…), or Heard calls. Alerts are Off until you pick Visual or Visual + Voice (click the chip on the top bar to cycle). With alerts on, a call STD decodes in the FT8 family, JS8, WSPR, or received keyboard text turns red for 15 minutes and amber after that, and the status line names the band, mode, and report; calls not heard are dim. Visual + Voice also says it, once per call every 15 minutes, with the voice, rate, and volume from Options → Speech on the Speech output device (the same device as RADE's Speaker box). It has its own voice, so it speaks in FT8 and WSPR, with read-back off or muted, while transmitting, and in RADE. A call matches whole, in FT8 brackets, or either side of a slash, so FO matches FO/WE9G. Click a call on the top bar to put it in the QSO bar; double-click it to tune to the band, mode, and dial where STD last heard it, or, if it has not been heard, to its DXpedition's band and mode; with neither, nothing moves. In View → DXpeditions, rows on the hot list are tinted orange, amber once heard, and red when heard in the last 15 minutes. With Mark spotted DXpeditions on, a cluster spot of a hot DXpedition marks it too, and the status line says spotted. Also check hot list calls (off until ticked) asks for every call on the hot list, such as a special event station; still digital spots only, so a station on SSB or CW never alerts. In JS8 the JS8 clock row takes that space and the hot list is hidden. Nothing on the hot list keys. Details in DXpeditions and the hot list.
A separate path, not the macro tag, stores a QSO when the sent line ends in 73 or RR73, that line contains the other station's call, and a log option is on (automatic, prompt, WSJT-X UDP, or DXKeeper TCP). That path writes ADIF.
Radio → Connect opens one WebSocket. The default port is 50001.
- Connect sends
AUDIO_START:0. - Disconnect sends
AUDIO_STOP:0. - The sideband command is
modulation:0,diguormodulation:0,digl. trx:0,true,tcigoes out only when the operator presses TX or Tune.
The text command START is never sent.
QRV. Options → Network Configuration → QRV is Off until On is selected. On tells qrvsdr.cc that this station is QRV: the callsign from Options → User, the band, and the Mode menu (FT8 stays FT8). It posts only while the radio is connected, about every 25 seconds, and sends QRT when you turn it off, disconnect, or quit. Share exact frequency is off until ticked; off, the board shows the band only. The optional note is 40 characters, and the server drops links and mentions. Options → QRV board lists who is on: call, app, band, mode, and Hz when a station shared it. Q65A is posted as Q65. RADE, WEFAX-576, and Q65B are not on the board. There is no second callsign field. It does not key, and START is never sent. Details are in QRV.
Options → PSK Reporter map opens the map for the callsign in Options → User. Options → Network Configuration uploads a spot after a decode only when Enable is checked. Antenna is the description sent with the spot. Also send WSPR spots to PSK Reporter stays off until checked. WSPRnet is Off or On in that same dialog, and Off posts nothing. That box is off until the operator turns it on. FreeDV Reporter is Off or On there too: On shows your call, locator, dial and TX on qso.freedv.org while a RADE mode is selected, and reports each RADE station you hear with its SNR. The box beside On is the Message column (name, QTH, rig), also on the RADE screen as Reporter message. The bottom status strip has a spot chip for the reporter the current mode feeds (PSK RPT in FT8/FT4/FT2/JT65/Q65/MSK144/MSKMS/JS8, WSPRNET in WSPR, FREEDV RPT in RADE): click the name to open that service's live page in your browser, and On/Off to turn it on or off. View FreeDV Reporter opens the map without connecting. There is no second callsign field. File → Backup settings saves layouts and the callsign and locator from Options → User. It does not copy the TCI host or port. File → Import settings, Backup logbook, and Export ADIF do not key.
Who heard me. Options → Network Configuration → Show who heard me (PSK Reporter), off until ticked, puts a chip on the status bar: HEARD, the number of stations that reported hearing your callsign (from Options → User) in the last 15 minutes on the band you are on, and the farthest of them, for example "HEARD 23 · 20m · best VK3XX 16400 km". It is green when someone heard you and grey when nobody has. Click it for the list, farthest first: call, country, band, mode, the SNR they heard you at, distance, and time. STD asks PSK Reporter every five minutes, as PSK Reporter asks, and only while you have transmitted in the last half hour; listening sends nothing. Changing band redraws the chip at once for the new band, and the Need column with it.
Help → Check for Updates uses the same notice as Lyra. A newer GitHub release, including a pre-release, opens a dialog the first time, then leaves an indicator on the brand bar.
STD is a 64-bit Windows application. The kit is Qt 6.11.1 MSVC at C:\Qt\6.11.1\msvc2022_64. CMake is C:\Qt\Tools\CMake_64\bin\cmake.exe. The compiler is Visual Studio 18 Community. It needs Qt 6 Widgets, Qt 6 GuiPrivate, and Qt 6 WebSockets. ft8dec.dll is built by src/ft8/build_ft8dec.cmd from the sibling MSHV tree and is loaded only to decode. The MinGW kit at C:\Qt\6.11.1\mingw_64 is not the kit this build uses.
The built program is build\std.exe. The window title is STD. The icon is the purple capsule from resources/std-icon.png. The Windows installer is dist\STD-Setup-0.1.13.exe, built with Inno Setup the same way as Lyra. Setup, the Start Menu, and the desktop shortcut use that icon.
A headless check constructs the window and exits. Set STD_SELFTEST=1 and QT_QPA_PLATFORM=offscreen, then run build\std.exe. Exit status 0 prints STD self-test ok.
- Web version of this page: https://n8sdr1.github.io/STD/
- Releases: https://github.com/N8SDR1/STD/releases (v0.1.13, testing phase · highly transmissible)
- Wiki: https://github.com/N8SDR1/STD/wiki
- Longer notes: modes, QRV, DXpeditions and the hot list, Hell, macros, contest, connect


