All issues

Search results

SDCP status/attribute pushes and MJPEG stream fail on OC patched, work on stock 1.4.46 (A/B on same unit)

Status: Open.

#109 In OpenCentauri/cc-fw-tools;

· ndemarco opened on Aug 7, 2026

MJPEG camera stream (:3031/video) produces zero body bytes — encoder-side, not session/client/header

Status: Open.

#108 In OpenCentauri/cc-fw-tools;

· ndemarco opened on Aug 6, 2026

M601 Filament Change Command (non-canvas) Causes Printer to Hang

Status: Open.

#107 In OpenCentauri/cc-fw-tools;

· computertester10 opened on Aug 3, 2026

0.4.0 Loading filament after unloading, unloads.

Status: Open.

#105 In OpenCentauri/cc-fw-tools;

· ReganGTX opened on Jul 21, 2026

0.4.0 / 1.4.46: print finishes but touchscreen stays on finished screen without Complete button

Status: Open.

#104 In OpenCentauri/cc-fw-tools;

· pdscomp opened on Jul 3, 2026

[Question] Does the new 0.4 patched firmware provides current tray information?

Status: Open.

#103 In OpenCentauri/cc-fw-tools;

· lp55 opened on Jul 3, 2026

patch overruns 8-byte version slot, breaking ElegooSlicer CANVAS sync / SDCP request attribute

bugSomething isn't workingSomething isn't working

Status: Open.

#102 In OpenCentauri/cc-fw-tools;

· pdscomp opened on Jul 2, 2026

Load Filament runs backward (reverse extrusion) on non-Canvas 1.4.46 after unload

Status: Open.

#101 In OpenCentauri/cc-fw-tools;

· pdscomp opened on Jul 1, 2026

NTP sync loop in oc-bootstrap is missing trailing &, blocks boot and leaves clock at 1970-01-01

bugSomething isn't workingSomething isn't working

Status: Open.

#100 In OpenCentauri/cc-fw-tools;

· pdscomp opened on Jun 30, 2026

M600 filament pause hangs on load, hotend drops to 0 °C on 0.4.0 / 1.4.46

bugSomething isn't workingSomething isn't working

Status: Open.

#99 In OpenCentauri/cc-fw-tools;

· pdscomp opened on Jun 30, 2026

Has there been any further dev on the patched firmware or is it all going to Cosmos?

Status: Open.

#91 In OpenCentauri/cc-fw-tools;

· jaymcd opened on Apr 24, 2026

Pause/restart offset error

Status: Open.

#90 In OpenCentauri/cc-fw-tools;

· Focusys opened on Mar 25, 2026