Skip to content
Quantum-Optics-LKBPublic

About

No description, website, or topics provided.

Resources

Stars

0 stars

Watchers

1 watching

Forks

Latest commit

 

History

108 Commits

Folders and files

NameName
Last commit message
Last commit date
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

ddGPE

Package to simulate coupled exciton and photon driven-dissipative Gross–Pitaevskii equations with a dark excitonic reservoir, using a first-order split-step spectral scheme and CuPy.

Installation

Clone the repository and install the package:

git clone https://github.com/Quantum-Optics-LKB/ddGPE.git
cd ddGPE
pip install .

Running simulations requires a working CuPy installation and a compatible CUDA GPU.

Physical model

The fields are evolved in the frame rotating at the pump angular frequency, with energies divided by hbar. With apply_reservoir=True, the deterministic model is

$$ \begin{aligned} i\partial_t\psi_X &= \left[\omega_X-\omega_p+g_0\left(|\psi_X|^2+n_r\right) -i\frac{\gamma_X+\gamma_{\mathrm{in}}}{2}\right]\psi_X +\Omega\psi_C,\\ i\partial_t\psi_C &= \left[\omega_C(-i\nabla)-\omega_p+U_C(\mathbf r) -i\frac{\gamma_C+\gamma_{\mathrm{in}}+v_\gamma(\mathbf r)}{2}\right]\psi_C +\Omega\psi_X+F(\mathbf r,t),\\ \partial_t n_r &= \gamma_{\mathrm{in}}\left(|\psi_X|^2+|\psi_C|^2\right)-\gamma_r n_r. \end{aligned} $$

Here the bare decay rates gamma_X and gamma_C refer to constructor inputs, before conversion losses are added. The linear propagation uses the Hopfield approximation described below.

Symbol Code parameter or array Meaning
$\psi_X$, $\psi_C$ phi[0], phi[1] Exciton and photon fields
$n_r$ den_reservoir Reservoir density, not a field amplitude
$g_0$ g0 Exciton interaction coefficient; also used for the reservoir-induced exciton shift
$\Omega$ rabi Off-diagonal exciton–photon coupling
$\gamma_X$, $\gamma_C$ Input gamma_exc, gamma_cav Bare coherent density decay rates
$\gamma_{\mathrm{in}}$ gamma_res Coherent-to-reservoir conversion rate
$\gamma_r$ gamma_res_decay Reservoir decay rate, set to the original input gamma_exc
$U_C$ potential Cavity potential energy divided by hbar
$v_\gamma$ v_gamma Additional photon density loss at the boundaries

The reservoir shifts only the exciton energy directly. Its effect on photons follows through exciton–photon coupling. There is no reservoir-dependent coherent gain, reservoir diffusion, or exciton potential in this implementation.

Conversion adds gamma_res to both coherent decay rates. The reservoir decay remains equal to the original gamma_exc input:

self.gamma_exc = input gamma_exc + gamma_res
self.gamma_cav = input gamma_cav + gamma_res
reservoir decay = input gamma_exc

Thus conversion removes coherent density and supplies reservoir density at matching rates in the differential model.

With apply_reservoir=False, the extra coherent losses and reservoir update are disabled. The nonlinear kernel still uses the supplied reservoir density: a nonzero initial_state[2] acts as a frozen exciton shift. The default initial reservoir is zero.

Dispersion, drive, and rotating frame

The exciton dispersion is flat, while the photon dispersion is

$$ \omega_C(\mathbf k)=\omega_C(0)\sqrt{1+|\mathbf k|^2/k_z^2}. $$

The pump frequency is defined using the bare, lossless lower-polariton energy at zero momentum:

$$ \begin{aligned} \omega_{\mathrm{LP}}(0)&= \frac{\omega_X+\omega_C(0)}{2} -\frac12\sqrt{[\omega_C(0)-\omega_X]^2+4\Omega^2},\\ \omega_p&=\omega_{\mathrm{LP}}(0)+\mathrm{detuning}. \end{aligned} $$

Positive detuning places the pump above this reference. For a finite pump wavevector, the effective detuning from the LP resonance also includes the dispersion shift at that wavevector.

The cavity drive is the sum of pump and probe amplitudes:

F = F_pump * F_pump_r * F_pump_t + F_probe * F_probe_r * F_probe_t

These profiles multiply field amplitudes; intensity is proportional to the squared modulus. A probe factor exp(-1j * omega_probe * t) denotes a frequency offset above the pump for positive omega_probe.

Units and conventions

Quantity Units
Time ps
Position micrometres
Fields inverse micrometres
Field and reservoir densities inverse square micrometres
omega_exc, omega_cav, rabi, detuning, decay rates inverse ps (angular-frequency convention)
g0 square micrometres per ps
potential inverse ps
Drive amplitude, for dimensionless profiles inverse micrometres per ps
Wavevector inverse micrometres (angular wavevector)

Convert energies in meV to evolution coefficients by dividing by hbar in meV ps. A physical potential V must be supplied as V / hbar; an interaction energy shift is hbar * g0 * density.

The term -1j * gamma / 2 gives amplitude decay exp(-gamma*t/2) and density decay exp(-gamma*t). The corresponding isolated-mode energy linewidth (FWHM) is hbar * gamma.

The lossless resonant Rabi splitting is 2 * hbar * rabi. In the thesis convention with off-diagonal coupling hbar * Omega_R / 2, use rabi = Omega_R / 2.

Lower-polariton mapping and reservoir fraction

For a predominantly LP field at low momentum, let X02 = |X_0|^2 be its exciton fraction and C02 = 1 - X02 its photon fraction. The code uses the phase convention

psi_LP = -X * psi_X + C * psi_C
psi_UP =  C * psi_X + X * psi_C

Projection with approximately constant Hopfield coefficients gives

g_LP = g0 * X02**2
g_res_LP = g0 * X02
F_LP = sqrt(C02) * F
bare gamma_LP ≈ X02 * input gamma_exc + C02 * input gamma_cav
additional gamma_LP = gamma_res

The model fixes the reservoir coupling and decay through these relations; they are not independent constructor inputs.

At steady state in this approximation:

n_res / n_LP = gamma_res / input gamma_exc
beta = (g_res_LP * n_res) / (g_LP * n_LP)
     = gamma_res / (X02 * input gamma_exc)

examples/physical_constants.py targets beta = 0.49 by calculating the zero-momentum exciton fraction and setting

delta_cx = omega_cav - omega_exc
X02 = 0.5 * (1 + delta_cx / (delta_cx**2 + 4 * rabi**2)**0.5)
gamma_res = 0.49 * X02 * gamma_exc

This is a steady-state, low-momentum calibration, not a constraint on transient or strongly mixed LP/UP states.

These conventions correspond to the LP reservoir model in Eq. (1.91) of K. Guerrero-Feuillet, Rotational superradiance in a polariton quantum fluid (2026), with thesis gamma_in mapped to code gamma_res, and thesis reservoir decay mapped to the input gamma_exc. The measured reservoir blueshift ratio is discussed in thesis section 3.1.7.

Model approximations

  • The linear step uses complex polariton eigenfrequencies with lossless Hopfield coefficients. This neglects the small change in composition due to unequal component losses; it becomes exact for equal losses.
  • The solver retains both branches and the full photon dispersion. The scalar LP model follows in the low-momentum, predominantly LP regime.
  • The reservoir evolves dynamically. Comparing with the thesis Bogoliubov treatment, which neglects reservoir-density perturbations, requires that additional approximation.
  • The equations above describe deterministic evolution. Optional noise is added after t_noise; its current increments scale with dt rather than sqrt(dt), so it is not a correctly time-step-scaled continuous white-noise discretization.

About

No description, website, or topics provided.

Resources

Stars

0 stars

Watchers

1 watching

Forks

Releases

Packages

Used by

Contributors

Languages