Modern Windows control software for the original Turn Up USB volume mixer,
with native support for the TreasLin / VSDinside N3 stream controller.
Install · Hardware · Features · Quick Wheels · OBS · Integrations · Build · Issues
Amp Up replaces the original Turn Up desktop software with a fast, modern WPF application. It maps physical controls to Windows audio, apps, profiles, lighting, macros, devices, and automations while keeping the original mixer responsive and useful as a daily driver.
The original Turn Up mixer is the primary supported device. Amp Up can also operate a TreasLin / VSDinside N3 natively, either by itself or alongside the Turn Up.
- Open the latest Amp Up release.
- Download the
AmpUp-Setup-{version}.exeinstaller. - Run the installer and launch Amp Up.
- Connect the Turn Up mixer, N3 stream controller, or both.
The Windows installer is self-contained, so users do not need to install the .NET runtime separately.
Important
Close the official Turn Up application before starting Amp Up. Only one application can own the Turn Up serial port at a time.
After the first install, future releases can be installed without visiting GitHub. Amp Up downloads the matching installer, verifies its GitHub-reported size and SHA-256 digest, exits cleanly, installs the update after the normal Windows elevation prompt, and relaunches itself.
Updates can be started from the version label, Settings → Check for Updates, or the tray update banner.
| Device | Status | Support |
|---|---|---|
| Original Turn Up USB mixer | Stable / primary | 5 knobs, 5 buttons, 15 RGB LEDs, native CH343 serial protocol, profiles, app groups, actions, and lighting |
| TreasLin / VSDinside N3 | Beta | 6 LCD keys, 3 side buttons, 3 rotary encoders with press, native HID, pages, Spaces, dynamic displays, and sleep/wake |
Amp Up supports Turn Up only, Stream Controller only, and Both hardware modes. The N3 driver is built in; VSD Craft, OpenDeck, and other helper applications are not required for normal use.
The experimental macOS port has been discontinued. Current releases support 64-bit Windows 10 and Windows 11.
- A slim sidebar that expands on hover, with sections for Hardware, Lighting, and App and the profile switcher at the top.
- A clean, calm layout: one soft card per section with no heavy outlines, boxes-inside-boxes, or colored stripes, quiet grey section headings, readable 12px labels, and scrollbars that sit on the window's right edge.
- Overview page with the active profile as the page heading, live device status pills, large device photos, and a card for every profile with compact knob, button, and key chips. Click a chip to jump straight to it.
- Settings redesigned in four tabs: Devices (big hardware-mode cards and device cards with product photos), General, Profiles, and Integrations.
- Integrations hub: one sidebar lists Govee, Corsair iCUE, SignalRGB, Home Assistant, OBS Studio, VoiceMeeter, Discord, and Spotify with their logos and a Connected / On / Off status. Pick a service to see its settings, and use its Setup guide for a step-by-step walkthrough.
- Groups page with every member of a group shown as chips (real app icons included) and "used by" pills that show which knobs share each group.
- Compact page headers, and the same cards, switches, sliders, dropdowns, and text boxes on every page.
- Searchable pickers with sections, friendly names, short descriptions, and real app icons.
- Small ? help tips explain each feature on hover instead of filling pages with text.
- Twelve card themes plus a custom accent color.
- Control master output, microphone input, individual apps, app groups, active-window audio, and specific input/output devices.
- Give each knob or N3 encoder its own card. Pick its target, then set curve, volume range, and sensitivity in the same card.
- Name app groups and share them between knobs and N3 encoders. An edit from any control updates the group everywhere it's used, and the Groups page lists every app group alongside your device groups.
- Match traditional desktop apps, games, browsers, UWP apps, and sessions whose display name differs from their process name.
- Move every audio session an app opens with one knob—apps such as Apple Music and Discord can show several sliders in the Windows volume mixer.
- Apply linear, logarithmic, or exponential response curves with custom minimum and maximum volume ranges. Range and curve work on every target, including monitor brightness, LED and room-light brightness, Govee, Home Assistant, VoiceMeeter, and fans.
- Use live VU meters, peak activity, mute state, and a unified tray mixer without opening the main window.
- Detect newly connected, removed, or changed Windows audio devices while Amp Up remains open—including Bluetooth endpoints.
- Cycle all eligible devices or a user-selected subset, with unavailable selections retained until the device returns.
- Assign tap, double-press, and hold actions to each Turn Up button. A tap fires instantly when the button has no double-press action.
- Use media, mute, app, device, profile, macro, URL, text, screenshot, power, integration, toggle, and multi-action commands.
- Mute the default mic, or a specific microphone or output device, from any button or key.
- Macros with pauses: the Macro category at the top of the action list builds multi-step keystroke sequences on a timeline. Record keys, hover between steps to drop in a pause (100 ms to 2 s, or any length), edit pauses in place, and drag steps to reorder. Press several keys together (like
T + Y) to record a real chord. Sequences run in the background, so a long macro never freezes your knobs. - Keystroke recorder: press Record and tap your hotkey. F1-F24 (including F13-F24), numpad, media, and punctuation keys all work, Windows shortcuts like
Win+VandWin+Ctrl+Vrecord without triggering Windows, and Hold key keeps keys down while you hold the button for push-to-talk. Macros can also be typed by hand (ctrl+shift+m,win + ctrl + v). - Chrome media buttons: play/pause, next, and previous that control only Chrome (YouTube and friends) so they never grab your Spotify session.
- Build profiles, import/export configurations, back up settings, and switch profiles manually or by foreground application.
- Automatically duck selected apps when a voice or priority application becomes active.
Hold a button, turn a knob, let go to pick. A Quick Wheel puts the things you switch often (profiles, audio devices, media keys, SignalRGB effects, OBS scenes, or your own actions) one gesture away.
- Seven wheel types: profiles, output devices, input devices, media controls, SignalRGB effects, OBS scenes, and fully custom wheels. Each wheel holds up to 12 items.
- Pick what it shows: every wheel type has a tick list. Choose the items and their order, or leave it empty to show everything.
- Your own icons: give any item a Material icon, an icon from a built-in or online pack, or your own image. "Open app" slots show the app's real icon automatically.
- Custom actions: switch, cycle, or mute a specific output or input device, launch apps, open URLs, send macros, switch profiles, take screenshots, control media and volume, and more. Slots named after a device or app label themselves.
- Restyle the wheel: start from a preset (Classic, Neon, Minimal, Glass, Compact, Bold), then adjust size, background transparency, color, ring thickness, spacing, glow, highlight style, center details, and the open animation (fade, pop, or spin).
- Live previews: every wheel card shows a mini wheel that updates as you edit; click it to see the wheel full size.
The OSD page also controls the volume, profile, and device pop-ups: turn each one on or off, set how long it stays, hide it over fullscreen apps, and pick its monitor. To place it, click a spot on the live mini monitor.
Mix your stream from the mixer. Amp Up talks to OBS Studio 28+ over its built-in WebSocket server, on the same PC or on a second streaming PC.
- Knobs control OBS sources: put any OBS audio source (mic, desktop audio, media, browser sources) on a knob or N3 encoder. The knob follows OBS's own fader scale, so its position matches the slider in OBS, and Volume Range and curve still apply.
- Live OBS meters: the Mixer meter shows what the stream actually hears, after OBS's filters and fader. Set a knob's lights to Audio Reactive → OBS Meter to watch your mic level on the knob itself.
- Two-way sync: move a slider in OBS and Amp Up follows; N3 encoders continue from OBS's real position.
- OBS On Air lighting: a light effect that switches color while you're streaming or recording, with its own animation for each state. Knob lights flash when a replay is saved.
- Button actions: switch scenes, mute sources, show or hide a source (your webcam, for example), turn a filter on or off (noise suppression, for example), start or stop streaming and recording, pause, add chapter markers, save replays, toggle the replay buffer and virtual camera, and run Studio Mode transitions. Pick scenes, sources, and filters from a list instead of typing them.
- OBS scenes Quick Wheel: hold a button and pick a scene, with the live scene marked.
- Status everywhere: mute LEDs follow OBS, and N3 keys can show recording, streaming, paused, replay buffer, and virtual camera states.
To connect, open Tools → WebSocket Server Settings in OBS, tick Enable WebSocket server, and copy the port and password into Settings → Integrations → OBS Studio in Amp Up. For a second PC, use that PC's IP address as the host.
- Drive all 15 LEDs directly with per-knob or room-wide Scenes.
- Choose from more than 60 static, animated, audio-reactive, position-aware, and state-aware effects.
- Edit gradients and palettes, brightness, speed, effect direction, and per-channel gamma calibration.
- Use app-status lighting for running, muted, unmuted, and activity states.
- Combine the active output-device color with physical knob position using Dev+Pos mode.
- Show when you're live with OBS On Air, or put an OBS source's live level on a knob with OBS Meter.
- Preview effects on the hardware while browsing the effect library.
- Edit the device on a blueprint drawing of the real N3, showing live previews of every key, button, and knob.
- Design six LCD keys with titles, icons, custom images, colors, glow, text placement, and display modes. A live mirror shows the key next to a mini map of the page.
- Organize actions into pages and Spaces, with Home navigation and automatic Back keys.
- Configure side buttons and encoder presses with tap, double-press, and hold gestures.
- Use encoder rotation for volume-style targets, page navigation, or Space navigation.
- Display clocks, dynamic mute/streaming/playback states, Spotify now-playing art, and hardware metrics.
- Render CPU, GPU, RAM, VRAM, temperature, usage, and fan gauges with configurable limits and colors.
- Use smooth scrolling titles, animated displays, native sleep/wake, and automatic reconnect behavior.
- Synchronize Govee, Corsair iCUE, Home Assistant, and Turn Up lighting from one Room workspace.
- Add Home Assistant lights from a searchable picker grouped by room, then control power, brightness, and white balance and let room effects, Music Reactive, and VU Fill drive them (best for static colors and slow effects; optional Screen Sync).
- Use static and animated room effects, Music Reactive, VU Fill, Screen Sync, and Game Mode.
- Screen Sync uses GPU capture (DXGI Desktop Duplication) with HDR tone-mapping. It samples the screen edges, picks dominant colors, and adjusts brightness to the scene.
- Set white balance per device and map light segments to screen edges, for example a rope light bent around a frame.
- Place devices on a room layout and map screen regions spatially.
- Control brightness, palettes, direction, temperature, device groups, and per-device participation.
- Support Govee LAN control, cloud-only devices, and compatible RGBIC segment effects.
- Dedicated ordered input workers keep slow button actions from blocking Turn Up or N3 device reads.
- High-frequency absolute knob events are coalesced so stale input cannot build a latency backlog.
- Serial stall detection reconnects the Turn Up if its USB stream stops responding.
- Serial input, N3 input, and RGB rendering run on their own threads, and unchanged lighting frames are skipped instead of resent.
- Memory is trimmed while Amp Up sits in the tray, and off-screen previews pause.
- Audio-session and RGB refresh paths are non-reentrant and clean up Windows audio resources deterministically.
- Runtime logs rotate automatically, repeated offline-device messages are rate-limited, and failed Spotify refresh credentials stop retrying continuously.
| Integration | What Amp Up supports |
|---|---|
| SignalRGB | Free localhost bridge for Turn Up LEDs, layouts, effect actions, blackout/restore, and profile sync without surrendering the serial port |
| Govee | LAN and Cloud devices, scenes, brightness, color, temperature, groups, RGBIC segments, room effects, and screen/music sync |
| Corsair iCUE | Room lighting, static and reactive effects, device sync, and supported fan/pump controls |
| Home Assistant | Entity actions and controls from hardware buttons, knobs, and N3 keys, plus Home Assistant lights in the Room page driven by room effects |
| OBS Studio | Source volume knobs with live OBS meters and two-way sync, scene / mute / source / filter / stream / record / replay / virtual camera actions, On Air lighting, and a scene Quick Wheel, on this PC or a second streaming PC. See OBS Studio |
| VoiceMeeter | Strip and bus gain and mute for Basic, Banana, and Potato; automatic detection or a chosen install folder, with automatic reconnect when VoiceMeeter restarts |
| Spotify | Playback actions, track state, and N3 now-playing artwork. Connect once: the session reconnects on its own after a reboot, even when Amp Up starts before the network is up |
| Discord RPC | Mute, deafen, push-to-talk, auto gain, echo cancellation, noise suppression, and leave-channel actions, plus Discord input and output volume as knob and N3 encoder targets, with live on/off state on N3 keys. Tester preview until Discord approves public access: open Settings → Integrations → Discord → Setup guide, send a friend request to aud10sayer on Discord asking for Amp Up tester access, and install the tester invite you get back |
Every integration has a Setup guide in Settings → Integrations that walks through connecting it, including Home Assistant tokens, OBS WebSocket, VoiceMeeter, iCUE, SignalRGB, Spotify, and Discord tester access.
Integration credentials and Amp Up configuration are stored locally under %APPDATA%\AmpUp.
See GitHub Releases for what's new in each version.
Amp Up keeps user data outside the installation directory:
| Data | Location |
|---|---|
| Configuration and profiles | %APPDATA%\AmpUp |
| Runtime log | %APPDATA%\AmpUp\ampup.log |
| Previous rotated log | %APPDATA%\AmpUp\ampup.previous.log |
| Downloaded update staging | %TEMP%\AmpUp\Updates\{version} |
- Close the official Turn Up app and any other software that may have opened its COM port.
- Unplug and reconnect the mixer, then allow a few seconds for Windows to restore the CH343 serial device.
- Check Settings → Devices if the configured port differs from the detected port.
- Open VoiceMeeter and enable the integration in Settings → Connected Apps. Either app can start first.
- If the status reads Remote API not found, click Browse and select the VoiceMeeter install folder, usually
C:\Program Files (x86)\VB\Voicemeeter.
- In OBS, open Tools → WebSocket Server Settings, tick Enable WebSocket server, and click Show Connect Info to check the port and password.
- The OBS card in Settings → Connected Apps says why a connection failed, such as a wrong password or an address it can't reach.
- If OBS runs on another PC, use that PC's IP address as the host and allow the WebSocket port (4455 by default) through its firewall.
- Amp Up reconnects on its own when OBS restarts.
- Confirm Windows shows the endpoint as connected and enabled.
- Allow a moment for Amp Up's debounced device refresh.
- Reopen the device picker if it was already expanded when the endpoint changed.
Include the following when opening a GitHub issue:
- Amp Up version
- Windows version
- Connected controller(s)
- Steps that reproduce the problem
- Relevant lines from
%APPDATA%\AmpUp\ampup.log
Review logs before posting if they contain device or application names you prefer not to share.
- Windows 10 or Windows 11
- .NET 8 SDK
- Inno Setup 6 only when building the installer
git clone https://github.com/audioslayer/ampup.git
Set-Location ampup
dotnet build AmpUp.sln -c Debug
dotnet run --project AmpUp.csproj.\build-installer.batThe script publishes a self-contained win-x64 build and creates:
installer\output\AmpUp-Setup-{version}.exe
The version comes from AmpUp.csproj. For the in-app updater to recognize a release, its Git tag and installer filename must use the same version—for example, tag v1.4 with AmpUp-Setup-1.4.exe.
| Path | Purpose |
|---|---|
AmpUp.Core/ |
Shared models, configuration, serial/HID protocols, RGB engine, services, and integrations |
App.xaml.cs |
Application startup, hardware orchestration, profiles, integrations, tray, OSD, and runtime coordination |
AudioMixer.cs |
Windows Core Audio sessions, endpoints, peaks, mute, and volume targets |
ButtonHandler.cs |
Gesture recognition and action execution |
Views/ |
Mixer, Buttons, Lights, Room, Groups, Overview, OSD, and Settings pages |
Controls/ |
Custom WPF controls, tray mixer, action pickers, N3 tiles, effects, and editors |
installer/ |
Inno Setup definition and generated installer output |
Bug reports and feature requests are welcome in GitHub Issues. Before submitting a change, build both configurations and keep unrelated local edits out of the commit:
dotnet build AmpUp.sln -c Debug
dotnet build AmpUp.sln -c Release
Built by audio
Buy me a coffee

