I am an Integrated Circuit (IC) Design student at FPT University, building academic foundations in Digital RTL Design and Design Verification (DV).
- π― Focus: Consolidating SystemVerilog verification fundamentals, self-checking testbenches, and on-chip bus protocols (AMBA AHB/APB).
- π Live Portfolio: Explore interactive project breakdowns and verified certificates at portfolio-giabao.vercel.app.
- ποΈ Community: Former Vice President β ICD Club (IC Design Club, FPTU, Spring 2026). Assisted in organizing academic workshops and guiding members through basic Verilog coding and simulation workflows.
- π Currently Learning: Layered testbench architectures, constrained-random stimulus, assertion-based checking (SVA), and code coverage metrics.
- Goal: Verified an AMBA AHB-to-APB bridge module using a layered SystemVerilog testbench.
- Testbench Setup: Implemented testbench components using Mailboxes, Virtual Interfaces, and Constrained-Random stimulus generation.
- Checks & Assertions: Designed a self-checking Scoreboard with an address-decode reference model; added SystemVerilog Assertions (SVA) to monitor protocol handshakes.
- Results: Identified an RTL addressing corner case during back-to-back write-read transfers; analyzed functional covergroups and code coverage in QuestaSim.
- Goal: Designed and verified a 64-bit Timer IP conforming to the AMBA APB protocol interface.
- Implementation: Written in synthesizable Verilog HDL with programmable clock prescaling, interrupt generation, and debug halt mode.
- Verification: Built self-checking test cases in QuestaSim covering operational modes and checking coverage metrics.
- Goal: Designed a 3-block RISC CPU core (Fetch, Instruction Decoder, Execute) in Verilog HDL.
- Implementation: Supported a 16-instruction ISA with a 4-operation ALU.
- Verification: Verified instruction cycles and register operations through testbenches and cycle-accurate waveform inspection in Vivado.

