RetroAchievements on real Mega Drive hardware — no emulator, no ROM patch.
MEGA-RAW connects a physical Mega Drive, a Mega EverDrive CORE and RetroAchievements. A custom FPGA core on the EverDrive identifies the cartridge by itself and brings its own in-game save state menu along.
Project page: https://liquid-wq.github.io/mega-raw/
An achievement unlocking on real hardware.
Log in, and the cartridge in the console identifies itself.
Deutsche Fassung weiter unten.
- One program file. No installation, no Qt libraries. The FPGA cores for CORE and PRO are built in and are put onto the SD card from inside the program.
- First-run setup. On the first start MEGA-RAW asks for your language and offers to set up the SD card.
- Clear status messages. If something is missing, MEGA-RAW tells you whether it is the USB cable, the console or the game, and what to do next.
- Stops by itself. If the console is switched off while monitoring, the monitor stops and the achievement list is cleared.
- Seven languages: English, German, Spanish, Portuguese (Brazil), French, Italian, Polish.
- Copy log button for bug reports.
| FPGA (recommended) | Legacy (patched) | |
|---|---|---|
| ROM stays untouched | yes | no, an IPS patch is applied |
| Game detection | automatic, from the cartridge | manual file selection |
| Hook database needed | no | yes |
| 2 MB size limit | no | yes |
| In-game save state menu | yes, its own | the EverDrive's own |
| Hardcore mode | planned, see below | no |
| Games prepared | any Mega Drive cartridge | 602 patched titles |
The FPGA build replaces the cartridge mapper with a custom core. Nothing is patched, nothing is injected, and no per-game hook database has to be maintained.
The legacy build patches a small routine into the ROM that reports values the PC reads over USB. It still works and stays available, but new work goes into the FPGA build.
A custom FPGA core on the Mega EverDrive takes the place of the standard mapper. While you play, it hands the values the achievements need to your PC over USB, and MEGA-RAW checks the RetroAchievements conditions there.
- Nothing is patched. The game runs unmodified, and nothing is written back into it.
- Automatic detection. The cartridge is recognised by itself, no ROM folder and no manual selection needed.
- Save state menu — replacing the cartridge mapper normally costs you the EverDrive's in-game menu. MEGA-RAW brings its own along instead, built from scratch: it saves the complete state of the console and puts it back exactly as it was. Start + Down opens it over the running game: CONTINUE, SAVE, LOAD, EXIT. Four slots per game, stored as files on the SD card, so they survive switching the console off.
A few games cannot open the menu, and sound is not part of a save state.
Some games use the Start button themselves. If Continue does not react in the menu, confirm with C instead.
- Mega EverDrive CORE (Krikzz) — this is what MEGA-RAW is developed and tested on.
- Mega EverDrive PRO — experimental support since 1.3.0. Achievements work there according to tester feedback, the in-game menu does not work on the PRO yet. Feedback is welcome as a GitHub Issue.
- Other models are untested.
- Original Mega Drive / Genesis hardware
- USB connection between EverDrive and PC
- Windows
- A free RetroAchievements account
- Download the latest release, unpack it and start
mega-raw.exe. - The first-run setup asks for your language and offers Set up mapper on SD card. Point it at your SD card. The custom cores for both devices (CORE and PRO) are copied to every location the console loads from; each device picks its own file. This can also be done later from the main window.
- Log in with your RetroAchievements account. With Stay logged in the program signs you in by itself next time; your password is not stored.
- Put the card back into the console, connect the EverDrive by USB and start a game.
- Press Connect & start monitor. The game is detected automatically.
Hardcore is planned, but not active yet. RetroAchievements only counts Hardcore unlocks from clients it has approved, and a client has to be publicly available for at least six months before it can be considered. MEGA-RAW is still too new for that, and it also has to pass a set of checks by RetroAchievements. Until then, every unlock is recorded as Softcore.
The groundwork is already in place: MEGA-RAW checks your setup before and during a session. If the EverDrive's in-game menu or cheats are enabled, it says so and stays in Softcore.
MEGA-RAW is free to use. The source is public to read and audit, but it is not open source — see LICENSE.
Third-party components are listed in THIRD-PARTY-NOTICES.txt.
| Folder | Contents |
|---|---|
src/, assets/ |
MEGA-RAW 2.0.0 (current) |
legacy/qt/ |
the FPGA build, Qt version 1.x |
legacy/cpp/ |
the patched build, C++ port |
legacy/python/ |
the patched build, original Python version |
There are counterparts for the NES, the Super Nintendo and the Saturn: RAW-NES, RAW-SNES and RAW-TURN.
Built by Liqui.
RetroAchievements auf echter Mega-Drive-Hardware — kein Emulator, kein ROM-Patch.
MEGA-RAW verbindet ein echtes Mega Drive, ein Mega EverDrive CORE und RetroAchievements. Ein eigener FPGA-Kern auf dem EverDrive erkennt die Kassette selbst und bringt ein eigenes Ingame-Menü für Speicherstände mit.
Projektseite: https://liquid-wq.github.io/mega-raw/
- Eine einzige Programmdatei. Keine Installation, keine Qt-Bibliotheken. Die FPGA-Kerne für CORE und PRO sind eingebaut und werden aus dem Programm heraus auf die SD-Karte gebracht.
- Ersteinrichtung. Beim ersten Start fragt MEGA-RAW nach der Sprache und bietet an, die SD-Karte einzurichten.
- Klare Statusmeldungen. Fehlt etwas, sagt MEGA-RAW, ob es am USB-Kabel, an der Konsole oder am Spiel liegt und was zu tun ist.
- Stoppt von selbst. Wird die Konsole während der Überwachung ausgeschaltet, stoppt der Monitor und die Achievement-Liste wird geleert.
- Sieben Sprachen: Englisch, Deutsch, Spanisch, Portugiesisch (Brasilien), Französisch, Italienisch, Polnisch.
- Knopf Log kopieren für Fehlermeldungen.
| FPGA (empfohlen) | Klassisch (gepatcht) | |
|---|---|---|
| ROM bleibt unverändert | ja | nein, es wird ein IPS-Patch angewendet |
| Spielerkennung | automatisch, aus der Kassette | Datei von Hand wählen |
| Hook-Datenbank nötig | nein | ja |
| 2-MB-Grenze | nein | ja |
| Ingame-Menü für Speicherstände | ja, ein eigenes | das des EverDrive |
| Hardcore-Modus | geplant, siehe unten | nein |
| Vorbereitete Spiele | jede Mega-Drive-Kassette | 602 gepatchte Titel |
Die FPGA-Fassung ersetzt den Kassetten-Mapper durch einen eigenen Kern. Es wird nichts gepatcht, nichts eingeschleust, und es muss keine Hook-Datenbank gepflegt werden.
Die klassische Fassung patcht eine kleine Routine ins ROM, die Werte meldet, die der PC über USB liest. Sie funktioniert weiterhin und bleibt verfügbar, neue Arbeit fließt aber in die FPGA-Fassung.
Ein eigener FPGA-Kern auf dem Mega EverDrive ersetzt den Standard-Mapper. Während du spielst, gibt er die Werte, die die Achievements brauchen, per USB an den PC weiter, und MEGA-RAW prüft dort die Bedingungen von RetroAchievements.
- Nichts wird gepatcht. Das Spiel läuft unverändert, und es wird nichts hineingeschrieben.
- Automatische Erkennung. Die Kassette wird von selbst erkannt, kein ROM-Ordner und keine Auswahl von Hand nötig.
- Speicherstand-Menü — wer den Kassetten-Mapper ersetzt, verliert damit normalerweise das Ingame-Menü des EverDrive. MEGA-RAW bringt deshalb ein eigenes mit, komplett selbst gebaut: Es sichert den vollständigen Zustand der Konsole und stellt ihn exakt wieder her. Start + Runter öffnet es über dem laufenden Spiel: CONTINUE, SAVE, LOAD, EXIT. Vier Slots je Spiel, als Dateien auf der SD-Karte, sie überleben also das Ausschalten.
Bei einigen wenigen Spielen lässt sich das Menü nicht öffnen, und der Ton ist nicht Teil eines Speicherstands.
Manche Spiele belegen die Start-Taste selbst. Reagiert CONTINUE im Menü nicht, stattdessen mit C bestätigen.
- Mega EverDrive CORE (Krikzz) — darauf wird entwickelt und getestet.
- Mega EverDrive PRO — seit 1.3.0 testweise unterstützt. Achievements funktionieren dort laut Rückmeldung eines Testers, das Ingame-Menü läuft auf dem PRO noch nicht. Rückmeldungen gern als GitHub Issue.
- Andere Modelle sind ungetestet.
- Original Mega Drive / Genesis
- USB-Verbindung zwischen EverDrive und PC
- Windows
- Ein kostenloses RetroAchievements-Konto
- Die aktuelle Fassung herunterladen, entpacken und
mega-raw.exestarten. - Die Ersteinrichtung fragt nach der Sprache und bietet Mapper auf SD-Karte einrichten an. Dort die SD-Karte angeben. Die eigenen Kerne für beide Geräte (CORE und PRO) werden an alle Stellen kopiert, von denen die Konsole lädt; jedes Gerät nimmt seine eigene Datei. Das geht auch später im Hauptfenster.
- Mit dem RetroAchievements-Konto anmelden. Mit Eingeloggt bleiben meldet sich das Programm beim nächsten Start selbst an; das Passwort wird nicht gespeichert.
- Karte zurück in die Konsole stecken, das EverDrive per USB verbinden und ein Spiel starten.
- Verbinden & Monitor starten drücken. Das Spiel wird automatisch erkannt.
Hardcore ist geplant, aber noch nicht aktiv. RetroAchievements wertet Hardcore-Freischaltungen nur von Programmen, die es freigegeben hat, und ein Programm muss dafür mindestens sechs Monate öffentlich verfügbar sein. Dafür ist MEGA-RAW noch zu neu, außerdem muss es eine Reihe von Prüfungen durch RetroAchievements bestehen. Bis dahin wird jede Freischaltung als Softcore gebucht.
Die Grundlage ist schon vorhanden: MEGA-RAW prüft die Einrichtung vor und während einer Sitzung. Sind das Ingame-Menü oder Cheats des EverDrive eingeschaltet, weist MEGA-RAW darauf hin und bleibt bei Softcore.
MEGA-RAW ist kostenlos nutzbar. Der Quelltext ist öffentlich einsehbar und prüfbar, aber nicht Open Source — siehe LICENSE.
Fremde Bestandteile sind in THIRD-PARTY-NOTICES.txt aufgeführt.
Gegenstücke gibt es für NES, Super Nintendo und Saturn: RAW-NES, RAW-SNES und RAW-TURN.
Gebaut von Liqui.

